We promise to produce the best products with our long experience and practical know-how, and become a company that always does its best.
A-ONE Emulsion is constantly striving for a better tomorrow.
A-ONE Asphalt Primer
(A-BP 100)
(A-BP 100)
A-ONE Asphalt Primer is a moisture-proof and waterproof asphalt primer with adhesion reinforced by mixing a resin and a highly volatile solvent with asphalt. It is widely used for a variety of applications including cement, mortar, wood, and metal tube work. The product also delivers a superb performance in the pavement of bridge decks, and makes a good choice for cleaning the slab surface and bonding waterproof sheets.
Use
- Undercoat of various waterproof and moisture-proof layers
- Adhesive for waterproofing sheets
- Undercoat of metal protective layers
- Preservation of wood
- General house basement and roof waterproofing
- Adhesive for asphalt bridge deck pavement waterproofing
Features
- Excellent water resistance and elasticity against cracks
- Stability against dynamic load, excellent pavement and adhesion
- Little material change against thermal change
- Prevention of corrosion and deterioration of bottom plate rebar due to rainwater penetration
Standard - KS M 2270 (Asphalt primer for moisture and waterproofing)
| Test Items | Specifications | |
|---|---|---|
| Viscosity (Saybolt Furol) 25℃ | 25~125 | |
| Distillation Test (Volume % for the sample up to 360°C) | Up to 225℃ | 35 or higher |
| Up to 360℃ | 65 or less | |
| Distillation Residue Test (Distillation residue up to 360℃) | Penetration (25℃, 100g, 5 seconds) | 20~50 |
| Trichloroethane Soluble (%) | 99.0 or higher | |
| Sieve (250㎛) impermeable content (%) | 0.02 or less | |
Asphalt Primer Usage (ℓ/㎡)
| Place of Use | Concrete side | Coarse mortar side | Smooth mortar side | Metal side | Wood side |
|---|---|---|---|---|---|
| Usage | 0.4~0.8 | 0.2~0.4 | 0.1~0.3 | 0.1~0.2 | 0.3~0.4 |
* The amount of application varies depending on the lower layer, and it should be dried until the viscosity disappears (1-5 hours).
Handling Precautions
- When it rains, waterproofing work should be stopped, and if there are irregularities on the membrane due to rain immediately after the work is completed, the membrane should be sufficiently dried and additional membrane waterproofing work should be performed on them.
- Pay attention to ventilation during handling
- Keep the work sealed as it can harden when exposed to air for a long time.
- When the skin came into contact with the material, wipe it off immediately and wash the skin with soap.
- The installation conditions of the asphalt primer must be in accordance with the specifications of the supplied product, and must be installed after obtaining approval from the construction supervisor before work.
Company
A-ONE Emulsion Co.,Ltd.
Owner
Shim Sung-Hoon
Business License
180-86-00159
E-mail
a-onebitu@hanmail.net
- Headquarters Address in Ulsan
- 9-10, Jeomchon 6-gil, Beomseo-eup, Ulju-gun, Ulsan Metropolitan City, 201ho, South Korea. Tel +82-52-269-7877 Fax +82-52-700-7879
- Gyeongju Factory Address
- 153, Naengcheonjenae Industrial Complex-gil, Oedong-eup, Gyeongju, Gyeongsangbuk-do, South Korea Tel +82-54-771-1450~2 Fax +82-54-771-1455
- Seoul/Gyeonggi Branch Address
- 1403, 26, Ori-ro 876beon-gil, Cheolsan-dong, Gwangmyeong-si, Gyeonggi-do, South Korea (Miseong Office Building 2nd Phase) Tel +82-70-4607-1699 Fax +82-52-700-7879
Copyrightⓒ 2021 A-ONE Emulsion. All rights reserved.
