We promise to produce the best products with our long experience and practical know-how, and become a company that always does its best.
A-ONE Emulsion is constantly striving for a better tomorrow.
A-ONE Water-Soluble Rubber-Based Asphalt (Waterproofing membrane)
(A-RA 100)
(A-RA 100)
Being a rubber asphalt-based waterproofing material made from asphalt and rubber, A-ONE water-soluble rubber-based asphalt (waterproofing membrane) provides an excellent elongation and durability performance, and its eco-friendliness due to water solubility, and easy workability make it an ideal choice for indoor (non-exposed) water proofing and the pavement of asphalt concrete.
Use
- Waterproofing membrane for the asphalt pavement of bridge decks and underpass waterproofing work
- Indoor waterproofing for toilets, verandas, and utility rooms
Features
- Excellent elongation and durability
- Excellent adhesion and water resistance as a high-performance adhesive enhancer
- Cold type installation for easy installation
- Water-solubility and eco-friendliness
A-ONE Water-soluble Rubber-based Asphalt (waterproofing membrane) KS Standard (KS F 3211: 2015): Rubber asphalt
| Item | Unit | KS Standard | ||
|---|---|---|---|---|
| Tensile Performance | Tensile Strength | N/㎟ | 0.3 or higher | |
| Elongation at break | % | 600 or more | ||
| Tearing Performance | Tearing Strength | N/㎟ | 2.9 or higher | |
| Temperature Dependence | Tensile Strength Ratio (%) | Temperature at test | -20℃ | 700 or higher |
| Temperature at test | 60℃ | 5 or higher | ||
| Elongation between bites at break (%) | Temperature at test | -20℃ | 70 or higher | |
| Temperature at test | 20℃ | 600 or higher | ||
| Temperature at test | 60℃ | 600 or higher | ||
| Heating Elasticity | Stretch Rate | % | -1 or more and 1 or less | |
| Tensile Performance after Aging Treatment | Tensile Strength Ratio | Thermal Treatment | % | 80 or more and 150 or less |
| Alkali Treatment | % | 80 or higher and 150 or less | ||
| Elongation at break | Thermal treatment | % | 600 or more | |
| Alkali Treatment | % | 600 or more | ||
| Deterioration properties at the time of elongation | Thermal treatment | - | There shall be no cracks or obvious deformations on any test piece. | |
| Adhesion Performance | After repeated cold and hot treatment | State of the membrane | - | There shall be no floating or stripping on the membrane in any specimen. |
| Anti-fatigue Performance | - | There shall be no puncture, tear, or breakage of the membrane in any specimen. | ||
| Solid Content | % | Display Value, ± 3 | ||
| Reference | Mostly unexposed-type | |||
Handling Precautions
- When it rains, waterproofing work should be stopped, and if there are irregularities on the membrane due to rain immediately after the work is completed, the membrane should be sufficiently dried and additional membrane waterproofing work should be performed on them.
- Pay attention to ventilation during handling
- Keep the work sealed as it can harden when exposed to air for a long time.
- When the skin came into contact with the material, wipe it off immediately and wash the skin with soap.
- The installation conditions of the asphalt primer must be in accordance with the specifications of the supplied product, and must be installed after obtaining approval from the construction supervisor before work.
Company
A-ONE Emulsion
Owner
Shim Sung-Hoon
Business License
180-86-00159
E-mail
a-onebitu@hanmail.net
- Ulsan Head Office
- 2nd fl., Jeomchon 6-gil 9-10, Beomseo-eup, Ulju-gun, Ulsan Metropolitan City Tel +82-52-269-7877 Fax +82-52-700-7879
- Gyeongju Plant
- Naengcheonjenaegongdan-gil 153, Oedong-eup, Gyeongju-si, Gyeongsangbuk-do Tel +82-54-771-1450~2 Fax +82-54-771-1455
- Seoul/Gyeonggi Office
- Room #1403, Ori-ro 876beon-gil 26, Gwangmyeong-si, Gyeonggi-do (Miseong Officetel #2, Cheolsan-dong) Tel +82-70-4607-1701 Fax +82-52-700-7879
Copyrightⓒ 2021 A-ONE Emulsion. All rights reserved.
